NEC Aspire S IntraMail - Page 74

Dial Action Table
64 ◆ Chapter 2: Features IntraMail for Aspire System Guide
Programming
Step 1 Assign a Dial Action Table to each active Call Routing Mailbox.
1.1 47-08-01: Dial Action Table on page 219.
- The Call Routing Mailbox uses the Dial Action Table assignment to provide dialing options
to callers.
✔The default Call Routing Mailboxes (1-8) use Dial Action Table 1.
Step 2 Customize the Dial Action Table options.
2.1 Turn to 47-13: IntraMail Dial Action Tables on page 235 for a description of all the Dial
Action Table options and the features to which they apply.
✔The default Dial Action Table dialing options are:
Step 3 Set how long Automated Attendant caller have to dial commands.
3.1 47-08-03: Time Limit for Dialing Commands on page 219.
- Enter the Time Limit for Dialing Commands interval (0-5 seconds).
✔By default, the interval is 5 seconds.
Dial Action Table Default Settings
Key Dial Action Table 1 Dial Action Tables 2-16
0 UTRF to 301
(Unscreened Transfer to operator)
UND
(Undefined)
1 UND
(Undefined)
UND
(Undefined)
2 UND
(Undefined)
UND
(Undefined)
3 UTRF to XXX
(Unscreened Transfer to user-dialed
extension)
UND
(Undefined)
4 UTRF to XXX
(Unscreened Transfer to user-dialed
extension)
UND
(Undefined)
5 UND
(Undefined)
UND
(Undefined)
6 UND
(Undefined)
UND
(Undefined)
7 UND
(Undefined)
UND
(Undefined)
8 UND
(Undefined)
UND
(Undefined)
9 HNGUP
(Hangup)
UND
(Undefined)
* REC1 to IXXX
(Quick Message with Greeting to user-
dialed extension)
UND
(Undefined)
# LOGON to IXXX
(Logon to user-dialed mailbox)
UND
(Undefined)
Timeout UTRF to 301
(Unscreened Transfer to operator)
UND
(Undefined)