NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
NEC America DS1000/2000 Workbook ◆ 127
System Programming
The System Numbering Plan
The system’s Flexible Numbering Plan feature allows you to change the digits
users dial to reach the attendant, other co-worker’s and trunks. The following
chart shows the digits used for features in a default system.
The digits for these features can be changed within the system numbering plan,
but you should be careful that the change will not affect the operation of any other
feature.
For this feature:
You can change the digits a
user dials to:
These digits are
normally:
Attendant Position Reach the system operator(s) 0 or 01-04
Intercom Call a co-worker over the
Intercom
DS1000: 300-325
DS2000: 300-395
Direct Trunk Access Directly access a trunk DS1000: 401-406
DS2000: 401-448
Central Office Calls,
Placing
Access a Trunk Group 90-98

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English