NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
NEC America DS1000/2000 Workbook ◆ 135
Some Commonly Used System Programs
The following section takes some commonly used programs and shows you what
to enter in order to program the item. The DS1000/2000 Software Manual covers
all the programs and has complete details on the options the program affects.
Program 0302 - Time and Date Setting
Use this program to set the system’s time and date.
1. Enter the programming mode.
2. 0302 +
HOLD
3. Enter the system name (up to 14 characters) + VOL ▲.
(Refer to Programming Names and Text messages on page 33 if you need help
in entering names.)
OR
Press
VOL ▲ to scroll to the next option.
After pressing
VOL ▲ to scroll to the next entry, you can press CONF
to exit the program.
4. Enter the site phone number (up to 14 digits) + VOL ▲.
OR
Press
VOL ▲ to scroll to the next option.
You cannot edit this entry.
5. Press VOL ▲ to scroll to the next option.
You cannot edit this entry.
6. Press
VOL ▲ to scroll to the next option.
7. Enter the system time (HH:MM:SS in 24-hour format) +
VOL ▲.
OR
Press
VOL ▲ to scroll to the next option.
8. Enter the system date (MM:DD:YY) +
VOL ▲.
OR
Press
VOL ▲ to scroll to the next option.
OR
Press
CONF to exit the program.
0302:SYSTEM ID
NAME?
0302:SYSTEM ID
PHONE?
0302:SYSTEM ID
SYS TYP:DS-1000
0302:SYSTEM ID
S/W VER:
0302:SYSTEM ID
TIME?
0302:SYSTEM ID
DATE?:

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English