DS1000/2000 Correspondence Course
System Programming
164 ◆ DS1000/2000 Workbook NEC America
5. Dial 3 to initialize the Voice Mail database.
6. Dial 4 to install the database for DS1000/2000.
7. Press #, then follow the voice prompts to answer.
Older NVM-Series Voice Systems without DS1000/2000 Integration
If your NVM-Series Voice Mail does not have DS2000 as a menu selection in IN -
INSTALL SYSTEM, do the following:
● Set up the Voice Mail database.
1. Select IN - Install System
2. Reinstall the Voice Mail for DS01/VS (24 x 72) and customize the
trunk numbers to begin with 401.
● Change the Voice Mail Call Pickup String.
1. Select CU - Customize Database.
2. Select SO - System Options.
3. Change the Call Pickup String option to W**.
● Change the Voice Mail Park and Page String.
1. Select CU - Customize Database.
2. Select MO - Mailbox Options
3. Enter the extension’s mailbox number (e.g., 300 for extension 300).
4. For the mailbox selected (e.g., 300), change the Park/Paging string
option to: FW**nnn/*10 (where nnn is the extension’s number).
For extension 300, for example, the string would be FW**300/*10.
● Change the Voice Mail Off Hook Call Announce and Ringdown
Strings.
The Ringdown String is required for Voice Mail Call Announce
options 1, 2 and 3. The Off Hook Call Announce String is required
for Voice Mail Call Announce Options 2 and 3.
1. Select CU - Customize Database.
2. Select SO - System Options.
3. Change the Off Hook Call Announce String option to: 9P@A|2.
This option may not be available on all Voice Mail systems.
4. Change the Ringdown String to B (DTMF digit B).
This option may not be available on all Voice Mail systems.
Refer to your NVM-Series Documentation for additional details.