NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
NEC America DS1000/2000 Workbook ◆ 145
Program 9999 - System Initialization
This program will allow you to initialize the system database. Ini-
tializing the system erases all your programmed entries and
replaces them with the factory-installed default values, so make
sure this is what you want to do!!
1. Enter the programming mode.
You must be using the Installer’s password - the System Administra-
tor 1 and 2 passwords will not allow you to use Program 9999.
2. 9999 +
HOLD
3. Enter Y + HOLD to initialize the system.
OR
Enter N +
HOLD to exit the program without initializing.
If you enter Y, the system will initialize with the factory-installed
default and return to the idle state.
9999:INITIALIZATION
INITIALIZE SYS?nnn

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English