NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
NEC America DS1000/2000 Workbook ◆ 159
Programming Guide
Step-by-step guide for setting up Key Ring
(Sheet 1 of 2)
Step 1: Should extension have Key Ring for trunk?
• In Program 1805 - Ring Assignments
- Enter 2 for day & night Key Ring,
- Enter 3 for night only Key Ring,
- Enter 4 for delayed day & night Key Ring.
• To ensure that a trunk will always have a ring des-
tination, consider making at least one extension in
the system type 2 for all trunks.
• In Program 1805 - Ring Assignments enter 1 for
lamp only (no Key Ring).
Step 2: Should trunk be a Key Ring trunk during the day?
• In Program 1003 - Direct Termination (Day)
press CLEAR to assign the trunk as a day mode
Key Ring trunk.
• Refer to Direct Inward Line to make a different
day mode assignment for the trunk.
Step 3: Should trunk overflow during the day mode?
• In Program 1003 - Activate Overflow During the
Day enter Y.
• In Program 1003 - Day Overflow Destination
assign the extension, Ring Group, UCD Group
master number or Voice Mail master number you
want to use for the trunk’s day mode overflow
destination.
• In Program 1003 - Activate Overflow During the
Day enter N.
Step 4: Should trunk be a Key Ring trunk during the night?
• In Program 1003 - Direct Termination (Night)
press CLEAR to assign the trunk as a night mode
Key Ring trunk.
• Refer to Direct Inward Line to make a different
night mode assignment for the trunk.
If yes
If no
If yes
If no
If yes
If no
If yes
If no

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English