NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
144 ◆ DS1000/2000 Workbook NEC America
Program 1805 - Ring Assignments
Use this program to set up incoming ringing for each trunk at each
extension.
1. Enter the programming mode.
2. 1805 +
HOLD
3. Enter the extension number you want to program + HOLD
OR
Press
HOLD to select extension 300.
The previously programmed value displays.
4. Enter the number of the trunk you want to program +
HOLD
OR
Press
HOLD to select trunk 1.
The previously programmed value displays on the second line. The
first line of the display shows the extension and trunk you are pro-
gramming.
5. For the extension and trunk selected, enter the ring option (1 = Lamp only
(day and night), 2 = Ringing day and night, 3 = Night Ring only, lamp during
the day, 4 = Delay ring day and night) +
VOL ▲
OR
Press
VOL ▲ to leave the current entry unchanged.
You see the options for the next consecutive trunk. The previously
programmed value displays.
6. Enter the ring option for the trunk +
VOL ▲
OR
Press
CONF to select another trunk.
OR
Press
CONF twice to select another extension.
OR
Press
CONF three times to exit the program.
1805:RING ASSIGNMENT
STATION #?n
1805: STA nnn
LINE NUMBER?n
1805:STA:nnn LINE:n
DAY / NITE RING
1805:STA:nnn LINE:n
DAY / NITE RING

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English