NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Programming
138 ◆ DS1000/2000 Workbook NEC America
Program 1801 - Extension Port Description
Use this program to set up some of the various options for
extensions.
1. Enter the programming mode.
2. 1801 +
HOLD
3. Enter the number of the station number you want to program (300-395) +
HOLD
OR
Press
HOLD to select extension 300.
The previously programmed value displays. Not all circuit types
may be available in the DS1000. Valid circuit types are:
00 = Uninstalled, 01 = 22-Button Standard, 02 = 22-Button Dis-
play, 06 = 34-Button Display, 09 = 34-Button Super Display, 10 =
Door Box, 11 = ESL, 15 = Analog station, 21 = 2OPX (1st port),
22 = 2OPX (2nd port - view only), 31 = VAU Module, 32 = VAU
Expansion Module, 35 = 3DCI Unit, 36 = 3ACI Unit
4. Enter the software port (for 3DCI, 3ACI, VAU and VAU Expansion Modules
only) +
VOL ▲.
OR
Press
VOL ▲ to leave the current entry unchanged.
The previously programmed value displays. Not all circuit types
may be available in the DS1000. Valid circuit types are:
00 = Uninstalled, 01 = 22-Button Standard, 02 = 22-Button Dis-
play, 06 = 34-Button Display, 09 = 34-Button Super Display, 10 =
Door Box, 11 = ESL, 15 = Analog station, 21 = 2OPX (1st port),
22 = 2OPX (2nd port - view only), 31 = VAU Module, 32 = VAU
Expansion Module, 35 = 3DCI Unit, 36 = 3ACI Unit
5. Enter the new station circuit type +
VOL ▲ twice.
OR
Press
VOL ▲ to leave the current circuit type unchanged
1801:EXTENSION PROG
STATION #?
1801: STATION #nnn
PT TYPE?n
1801: STATION #nnn
EXT:nnn
To scroll through the available entries instead of entering a code in this step:
1. Press ICM (your ICM key flashes fast).
2. Press VOL ▲ OR VOL ▼ until the entry you want displays.
3. Press HOLD to assign the displayed entry to the key.
You automatically advance to the next prompt.
1801: STATION #nnn
DCI TYP?n

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English