DS1000/2000 Correspondence Course
System Programming
NEC America DS1000/2000 Workbook ◆ 163
Interactive Soft Key Shows New Messages
The Display and Super Display Telephone interactive soft keys show the number of
new messages in the user’s mailbox. For example, if a Display Telephone user has 2
new messages in their mailbox, their Voice Mail soft key shows: VM02. If a Super
Display Telephone user has 2 new messages in their mailbox, their Voice Mail soft
key shows V-MAIL 02. The new message count resets to 00 as soon as the user calls
their mailbox (regardless of whether the new messages were listened to). The mes-
sage count returns when the system updates the MW key on the phone.
Notes on NVM-Series Voice Mail Configuration
!! IMPORTANT !!
Use the following steps only if your NVM-Series Voice Mail does not
include DS1000/2000 on the IN - Install System menu.
VANGARD Mail and NVM-1000/2000
To set up VANGARD Mail and NVM-2000 for DS1000/2000:
1. Following the instructions in your Voice Mail manual, connect the Voice Mail
to the telephone system.
2. From the Voice Mail Main Menu, enter IN + Enter.
3. Enter the Voice Mail password (CTL) + Enter.
4. When you see the Install System Menu, enter 7 + Enter (to select DS2000)
and follow the prompts.
NVM-2e and NVM-1000/2000
To set up NVM-2e for DS1000/2000:
1. Following the instructions in your NVM-2e manual, connect the Voice Mail
system.
The steps that follow assume your NVM-2e still has its default
programming.
2. From any extension:
- Press ICM.
- Dial the voice Mail master number (e.g., 700).
- (NVM-2e version 2.0 or higher) Dial 301, wait for the main menu.
- (NVM-2e version prior to 2.0) Dial 10, wait for the main menu.
3. At the main menu, dial DM (36) for the Database Management Menu.
4. Dial SI (74) for System Initialization.
To Next Page
Loading...
Need help?
General
