NEC DS1000 - Installing a Music Source

DS1000/2000 Correspondence Course
DS1000 System Installation
NEC America DS1000/2000 Workbook ◆ 63
Installing a Music Source
Your system provides connection for a customer provided music source.
Use this music source for Background Music and Music on Hold.
Be sure the connected music source is compatible with the following music
input specifications:
Input Impedance: 10K Ohms
Output Level: +18 dBr @ 1.0 KHz
1. Connect the music source to the BLK and YEL lugs on the Audio modu-
lar jack.
2. Plug a 6-conductor line cord into the AUDIO jack on the cabinet and into
the Audio modular jack.
Programming Background Music:
➻ 0201: Background Music
Enter Y to enable Background Music system-wide.
➻ 1802: BGM
Enter Y to enable Background Music at the extension.
Programming Music on Hold:
➻ 0201: Music on Hold
Enter Y to enable Music on Hold system-wide.
➻ 0201: MOH on Transfer
Enter Y to enable Music on Hold for transferred calls.