NEC DS1000 - How to Exit the Programming Mode; To exit the programming mode:

DS1000/2000 Correspondence Course
System Programming
130 ◆ DS1000/2000 Workbook NEC America
How to Exit the Programming Mode
To exit the programming mode:
1. When you see:
OR
Press and release the hookswitch.
OR
Press SPK.
If you don’t see one of the above prompts, press CONF until you do.
When you exit programming, the system automatically stores your
entries in Random Access Memory (RAM).
Logging On with this Password: Gives you access to these programs:
System Administrator 1 (level 1)
Password = 0000
Program 0302 - System Identification
Program 1101 - System Speed Dial Numbers
System Administrator 2 (level 1)
Password = 9999
Program 0302 - System Identification
Program 0801 - Selectable Display Messages
Program 1101 - System Speed Dial Numbers
Program 1701 - Programmable Function Key Assignments
Program 1702 - Personal Speed Dial
Program 1703 - DSS Key Assignment
Program 1704 - DSS Console Key Assignment
Installer (level 3)
Password - 372000
All
USER: nnn
ENTER PROGRAM?
nnnnn VER nn.nn.nn
PASSWORD: