NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
System Installation
42 ◆ DS1000/2000 Workbook NEC America
DS1000 Electrical Specifications
Power Supply: 120 VAC ± 10% @ 50-60 Hz
Output Power 35 Watts
Input Current 550 mA
VA 66 VA
Kwh .066 KwH
BTU 225 BTU
Grounding Requirements: 12 AWG copper wire
DS2000 Electrical Specifications
Power Supply: 120 VAC ± 10% @ 50-60 Hz
Output Power 91 Watts @ 100% full load
Input Current 1.50A @ 110V
VA 165
Kwh .165
BTU 563
Power Requirements: 120 VAC @ 1.5A (180 VA) max. per cabinet
Grounding Requirements: 12 AWG copper wire
Power Requirements
A dedicated 110 VAC 60 Hz circuit is required. For the DS1000, this must be
within 4 1/2 feet of the cabinet. For the DS2000, it must be located within seven
feet of the cabinet. You should install a separate dedicated outlet for each cabinet.

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English