NEC Express5800 Series User Manual

System Configuration 4-13
Memory Configuration
When you select “Memory Configuration” in the Advanced menu, the following screen appears.
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
ᴾ
Refer to the table below for information on options.
ᴾ
Option Parameter Description
Memory Size
㧩
Displays the memory size.
DIMM Group #1 Status Normal
[Not Installed]
Displays the memory status.
DIMM Group #2 Status Normal
[Not Installed]
Displays the memory status.
DIMM Group #3 Status Normal
[Not Installed]
Displays the memory status.
Extended RAM Step 1MB
1KB
Every location
[Disabled]
Set the time interval between memory tests.
Depending on the mounted memory
amount, it may take about several tens of
minutes to several hours to complete the
test. Set “Disabled” for normal operation.
[ ]: Factory-set

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)