System Configuration 4-15
SCSI Controller
When you select “SCSI Controller” in the Advanced menu, the following screen appears.
ᴾᴾ
Refer to the table below for information on options.
ᴾ
Option Parameter Description
SCSI Controller
ᴾ
[Enabled]
Disabledᴾ
If “Disabled” is selected, chip
stays in the reset status. In this
status, the SCSI Controller is
totally disabled and not
recognized by the PnP OS.
Option ROM Scan
ᴾ
[Enabled]
Disabledᴾ
If “Enabled” is selected, the
extended ROM of the device
will be initialized.
ᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾᴾ [ ]: Factory-set
ᴾ
To Next Page
Loading...
