4-16 System Configuration
LAN Controller
When you select “LAN Controller” in the Advanced menu, the following screen appears.
Refer to the table below for information on options.
Option Parameter Description
LAN Controller
ᴾ
[Enabled]
Disabledᴾ
If “Disabled” is selected, chip stays
in the reset status. In this status, the
LAN Controller is totally disabled
and not recognized by the PnP OS.
Option ROM Scan
ᴾ
[Enabled]
Disabledᴾ
If “Enabled” is selected, the
extended ROM of the device will be
initialized.
[ ]: Factory-set
To Next Page
Loading...
