4-32 System Configuration
Configure/View SCSI Controller Settings
When you select “Configure/View Host Adapter Settings” in the “Options” menu, the following
screen appears.
The following describes menus and parameters. Read the descriptions to optimize your system.
SCSI Bus Interface Definitions
Use arrow keys to select SCSI BUS Interface Definitions. The following table provides information
on options and their functions.
Option Parameter Function/settings
SCSI Controller ID 0 to [7] to 5 Set “7.”
SCSI Controller Parity [Enabled]
Disabled
Set “Enabled.”
SCSI Controller Termination [Enabled]
Disabled
This option allows you to select
whether or not to enable the
terminator.
Set “Enabled.”
[ ]: Factory-set
To Next Page
Loading...
