NEC Express5800 Series User Manual

Installing and Using Utilities 5-33
Monitoring Hard Disk
To monitor the hard disks and detect disk failures at an early stage, use the NEC ESMPRO Manager
and Agent. You can see configurations and information of hard disk in the Data Viewer.
Monitoring Operations
This section describes how to maintain hard disks.
1. Confirmation of hard disk failure
If NEC ESMPRO Agent detects some problem with a hard disk, it will report an alert of the
problem to NEC ESMPRO Manager. Check the alert viewer in the manager regularly.
Ex. If a hard disk in SCSI Slot (41/1) is broken, agent reports the following alert.
Status of the SCSI Slot (ID:41/1) has changed from Duplex to Broken.
And manager displays the problem information of the hard disk in the [ft] o [SCSI
enclosure] o [SCSI Slot] o [General] of the data viewer.
[General] of SCSI slot

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)