NEC Express5800 Series User Manual

Installing and Using Utilities 5-45
SCSI Adapter(ID:n/m/o)
SCSI Adapter contains the following information:
Item Description
Status Status of the SCSI adapter
ᴾ
SCSI Bus(ID:n/m/o/p)
The following information is displayed for SCSI Bus:
Item Description
Status Status of the SCSI bus (Primary or Secondary)
㩷
The following information is displayed for SCSI Bus:
Item Description
Change Makes the current bus the primary SCSI bus (For your maintenance
personnel).
* The execution of each button may take a few minutes. Wait for a while to update the display and
check the module status.
ᴾ
Ethernet Board(ID:/n/m/o) Port p
The following information is displayed for Ethernet Board:
Item Description
Status Status of the Ethernet board
ᴾ
BMC
The following information is displayed for Firmware:
Item Description
Active Status Current status of the firmware
IPMI Version IPMI version
Firmware Revision Firmware revision
SDR Version SDR version
SEL Version SEL version
ᴾ
SCSI Enclosure
The following information is displayed for SCSI Enclosure:
Item Description
Device SCSI enclosure name
Status Status of the SCSI enclosure
ᴾ

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)