Installing and Using Utilities 5-71
Procedure of Update from NEC ESMPRO Manager Menu
Update firmware in the procedure as follows:
1. Select [Tools]o[BMC FW Update Utility] from
the Operation Window’s menu.
The [BMC FW Update] dialog box appears.
2. Enter the device name and click [OK].
The [Execution Check] dialog box appears.
3. Store the firmware in the directory specified by
[Location].
The storage area may be modified. See "Changing
Update Data Storage Destination" described later.
4. Click [OK].
Run firmware update.
The advance of the update appears during update.
At the termination of update, the update result is displayed.
5. Click [OK].
To Next Page
Loading...
