NEC Express5800 Series User Manual

5-72 Installing and Using Utilities
Procedure of Update from the Server Maintenance Utility
Update the firmware in the procedure as follows.
1. Select [Firmware] on the main window of the Server
Maintenance Utility.
The [Firmware Update] screen appears.
2. Select [Update].
The [BMC FW update Tool] screen appears.
3. Select [BMC FW update Command]
menu, and press Enter.
The firmware will be updated.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)