NEC UX5000 - Figure 3-24 XML Suite Web Configuration - Add User

UX5000 XML Applications
UX5000 IP Resource Manual 3 - 19
Add User
Administrator’s Level access will allow an individual (system
administrator) to add and configure users for XML Application access.
From the Administration page, select the Add User link in the left-hand
column to add a new user account. A new user account must be setup
for each individual that will require access to the XML Application from
their IP-CTS, IP DESI-Less, and IP Enhanced terminals.
Name: For Reference enter the First and Last Name of the user to
define the account in the appropriate fields.
Login: Enter a unique login in name that will be used when logining
into the user web configuration page. Example: first letter of first
name and last name (JDoe)
PIN: PIN is the unique user password used for web configuration
and from the terminal XML login home page. Example: use the
individuals extension number
Email/Contact – these fields are used for administrator reference for
the user account
Is Admin: Select this box if you wish this user account for have full
administrator rights. Example: Add/Delete users and modify System
Link URL information.
 NOTE: These pages can be setup for Administrator login on any of the XML
terminals.
Figure 3-24 XML Suite Web Configuration – Add User