NEC UX5000 - Figure 2-23 Value Screens for Multiple Configurations

UX5000 IP Terminal AutoConfig Setup
2 - 20 IP Terminal AutoConfi
g
Setu
p
With the Increment and Even Increment Values, if the range is not
sufficient for the number of terminals being assigned, the remaining terminals
over the end value are left unchanged. The values are assigned in the order
displayed in the data entry list.
2. Parameter Update – Build a unique Configuration File to update only the
selected Parameter items that have been changed.
3. Cancel – Cancels the Data value change and returns to the previous
setting.
4. OK – Temporarily saves the data entry to the configuration file.
Be sure to save the configuration file using the Save button if the changes
made are acceptable.
Figure 2-23 Value Screens for Multiple Configurations
IP Address Sample
Other Numeric Value Sample