NEC UX5000 - Tool Manager

UX5000 IP Data Maintenance
UX5000 IP Resource Manual 6 - 7
SECTION 5 TOOL MANAGER
You can start various functions of Data Maintenance Tool (data backup, data
restore, hold music download, ringer tone download, and wallpaper
download).
5.1 Start and Termination
5.1.1 Starting Tool Manager
There are two ways to start Tool Manager.
❑ Start Tool Manager by double-clicking the [Tool Manager for UX5000 IP
Terminal] icon.
❑ Start Tool Manager from the start menu of Windows by clicking [Start] ->
[All Programs] -> [NEC] -> [Maintenance Tool for UX5000 IP Terminal] ->
[Tool Manager for UX5000 IP Terminal].
5.1.2 Terminating Tool Manager
There are two ways to terminate Tool Manager.
❑ Click the [Exit] button located at the bottom right of the screen. When the
termination confirmation appears, click the [OK] button to terminate Tool
Manager.
❑ Click the [x] button located at the top right of the screen. When the
termination confirmation appears, click the [OK] button to terminate Tool
Manager.