UX5000 IP Phone Manager
UX5000 IP Resource Manual 1 - 23
5.4 Data Reset
Data Reset will erase the configuration stored in terminal memory. There are
three terminal memory locations that can be reset.
IP Phone Settings – Terminal Configuration Data that is set in terminal
programming under the Config menu tree (IP address, port number, etc.).
Personal Settings (type of ring tone, color illumination selections, etc.
other than configuration settings)
Personal Data – Data that the user has personally set (hold tone, ring
tone, and telephone book)
Factory Default – Resets all three Data Settings.
Click on the check box for the terminal(s), select the Data Reset option from
the Command drop-down list, and click the Execute button.
Select the options to be reset - IP Phone Setting, Personal Setting, or
Personal Data. Multiple options can be selected at one time to be reset. Click
the Factory Default button will select all three options. Select the Command
Transmit to use (Send Once, Immediately or Send Until Successful - see
page 1-14) and click Execute.
Figure 1-20 Command Drop-Down List
To Next Page
Loading...
Need help?
General