NEC UX5000 - Figure 6-13 Upload Selection Screen; Figure 6-14 Upload Progress Screen

UX5000 IP Data Maintenance
6 - 12 Data Maintenance Tool
5. Set every item on the Upload screen, and click the [Run] button.
1. Specified Terminal
Specify the extension number or IP address of the terminal to
obtain data.
✎ To enter Extension Number, both the PC running this tool and the
terminal must be connected to the same segment network.
2. User authentication
Specify an ID and password to log into the terminal.


ID: USER
Password: 0000 (Default)
3. Network setting of this computer
Select the IP address of the PC on which this tool is running.
The following screen appears after the [Run] button is clicked.
Figure 6-13 Upload Selection Screen
Figure 6-14 Upload Progress Screen