UX5000 XML Applications
UX5000 IP Resource Manual 3 - 31
After setting the path to the UX5000’s IP address, use Program
10-56 in the UX5000 to assign the paths for up to 5 additional
XML applications (example: Conference Bridge, Screen Saver,
etc.). The applications are then access from the IP terminal by
pressing MENU - TOOLS - SERVICE and then selecting the
desired application number.
“Localhost” as the IP name if accessing the Web Page from a local
PC where XML Suite has been installed. When accessing the page
remotely, “localhost” needs to be replaced with the IP Address of the
PC where the XML Suite was installed.
5. Select OK twice. Click Save in the window which appears – the
terminal will reboot with the new settings.
Figure 3-37 Terminal Web Configuration – Home URL
To Next Page
Loading...
Need help?
General