NEC UX5000 - Figure 2-8 141 FTP Server Settings; Figure 2-9 151 File Name Settings

UX5000 IP Terminal AutoConfig Setup
2 - 6 IP Terminal AutoConfi
g
Setu
p
9. Auto Configuration requires three separate, unique NEC option codes to
be set up:
◆ 141 FTP Server – Network Server to which the Auto Configuration file
will be saved.
Enter an option code name (FTP Address) in the Name field. Set the
Data Type field to IP Address, enter the IP address of the FTP server
PC and enter 141 in the Code field. Select OK to save the settings.
◆ 151 File Name – Saved name of the Auto Configuration file. Select
Add to enter the next NEC option code.
Enter an option code name (AutoConfig File) in the Name field. Set the
Data Type field to String, and enter 151 in the Code field. Select OK
to save the settings.
Figure 2-8 141 FTP Server Settings
Figure 2-9 151 File Name Settings