NEC UX5000 Resource Manual

UX5000 IP Phone Manager
UX5000 IP Resource Manual 1 - 13
4.1 Terminal Connection
After terminals have been discovered by the IP Phone Manager Search
functionality, they must be connected before any action can take place. For
terminals which need to have data modified, select the check box next to the
desired terminal on the main screen and press Connect . On the IP Phone
Connect screen, click Execute . When the Status Field indicates OK , the
terminal is now in active communication with the IP Phone Manager. (A status
of “LogOFF” indicates there is no connection. A status of “LoginN/A” indicates
the terminal is connected with another IP Phone Manager session and cannot
be connected.)
To log terminals off and close the connection with the IP Phone Manager,
select the Logout option and click Execute .
Figure 1-10 Terminal Connection Screen

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English