NEC UX5000 - Figure 1-21 Data Reset Screen

UX5000 IP Phone Manager
1 - 24 IP Phone Mana
g
er
The status changes from “OK” to “Complete”.
If an “Error” status is displayed, reconnect the terminal(s) as the connection
may have been lost.
If a status of “Clear N/A” is displayed, the terminal is busy and the command is
not performed and should be attempted again after the terminal has had a
chance to finish. If the Send Until Successful was selected, the command
will be sent when the terminal becomes idle.
Figure 1-21 Data Reset Screen