NEC UX5000 - Figure 2-20 Manual Version Entry

UX5000 IP Terminal AutoConfig Setup
2 - 16 IP Terminal AutoConfi
g
Setu
p
6. New – return to the Home Screen to create a new configuration
file.
7. Open – Allows user to open an existing file.
8. Close – Ends the Auto Config Setup Application session.
9. Save – Save the current open file to a desired location.
10. Data Restore – Restores Modified Data settings to previous saved
or default entries. The Data Restore dialog box appears only when
a single configuration file is created.
✎ UX5000 IP terminals use the Version revision number to compare
internal terminal file and FTP server file versions during the Plug-and-
Play process. If the terminal does not have the same version number as
the stored FTP server, the terminal will download the FTP
configuration file version.
✎ The version number will automatically be updated when a file is
modified or the version number can be entered manually. If the terminal
loads an AutoConfig file that has the same version as a previously
loaded AutoConfig file, the data will not be updated. Therefore, be sure
to update the file version when creating a new file.
Figure 2-20 Manual Version Entry
Manual
Entry