NEC UX5000 - Figure 2-32 Build Configuration File - Assign 1 St Server Address; Figure 2-31 Build Configuration File - Select Server IP Address;Server Port

UX5000 IP Terminal AutoConfig Setup
2 - 28 IP Terminal AutoConfi
g
Setu
p
Figure 2-31 Build Configuration File – Select Server IP Address/Server Port
Figure 2-32 Build Configuration File – Assign 1st Server Address
Basic settings needed to
1. 1st Server Address
2. 1st Server Port
Assign the IP Address
Assign port 5080 to the
get the telephone working:
(programmed in 10-12-09)
1st Server Port.
to the 1st Server Address.
1
2
3