NEC UX5000 - Figure 1-17 Terminal Reset Screen

UX5000 IP Phone Manager
1 - 20 IP Phone Mana
g
er
If an “Error” status is displayed, reconnect the terminal(s) as the connection
may have been lost.
If a status of “Reset N/A” is displayed, the terminal is busy and the reset is not
performed and should be attempted again after the terminal has had a chance
to finish. If the Send Until Successful option was selected, the command will
be sent when the terminal becomes idle.
When a hard reset is performed, the connection to the terminal is dropped and
the status will be shown as “Search Error”. The connection to the terminal
must be re-established by clicking the Connect button from the main screen.
Figure 1-17 Terminal Reset Screen