UX5000 XML Applications
UX5000 IP Resource Manual 3 - 29
2.4 XML Terminal
To access and view the XML Application on the NEC IP-CTS, IP DESI-Less,
and IP Enhanced XML terminals to criteria need to be met. Terminal
configuration needs to have the XML Application URL entered and XML
enabled in terminal menu settings.
2.4.1 Terminal Configuration Setup
NEC IP terminals can be configured in one of 3 ways:
Manual Handset Programming
IP Phone Manager application or Auto Configuration Settings
Web Browser
NOTE: This instruction follows the Web browser Setup procedure.
Consult corresponding IP terminal user guides if one of the other 2
methods is desired.
2.4.2 Terminal Web Configuration
1. Open a web browser and enter the IP Address of the IP terminal to
be configured.
NOTE: The Terminal IP Address can be viewed by pressing the
terminal
CHECK Key for 2 seconds. Select #2 System
Information, #1 Network Settings and the Down Soft Key one
time. Press the Terminal Exit key to return to the main Application.
Figure 3-35 Terminal Web Configuration – Login Page
To Next Page
Loading...
