NEC UX5000 - Page 202

UX5000 IP Terminal Features
7 - 8 IP Terminal Features
SECTION 5 MW LED COLOR-DEFINABLE FOR INCOMING CALL INDICATION
With UX5000 software 2.g0 or higher, the Message Wait LED for IP terminals can
display different colors for different types of incoming calls. Intercom calls, trunk calls,
and incoming Call Coverage/Virtual Extension keys can be defined.
For this feature, three programs are available:
❏ Program 14-01-35 : Basic Trunk Data Setup - IP Terminal MW LED
Illumination for Incoming Trunk Call
❏ Program 15-05-37 : IP Terminal Basic Data Setup - MW LED Illumination for
Intercom Call
❏ Program 15-23-01 : MW LED Illumination for Call Coverage/Virtual
Extension Keys.
The LED will follow the priority below when multiple incoming calls are received:
If multiple virtual extension keys are ringing, the MW LED color will be determined by
Program 15-10-01. If the set order for the extension is the same for virtual extension
keys, the lowest number function key assigned as a Call Coverage/Virtual Extension
key is selected.
1 Voice Call Program 15-05-37
2 Door Box Call No LED
3 Hold/Transfer Recall, Callback, Transferred
Call
Red
4 Incoming Trunk Call (individual call such as
DID, DIL, etc.)
Program 14-01-35
5/6 Follow Program 22-01-01 : System Options for Incoming Calls - Incoming
Call Priority
If Program 22-01-01 is "1=Normal Trunk Call"
(Incoming Ring Group Call)
Program 14-01-35
If Program 22-01-01 is "0=Intercom Call" Program 15-05-37
7 Incoming Call to Call Coverage/Virtual Exten-
sion Key
Program 15-23-01
8 Message Wait/Voice Mail Message Indication
* Off-hook signaling will change the priority.