UX5000 IP Terminal Features
7 - 10 IP Terminal Features
❏ 15-05-37 : IP Terminal Basic Data Setup - MW LED Illumination for
Intercom Call
For each extension, select the color to be used when an
incoming call trunk is received (1-9). This applies to incoming
Intercom calls, forwarded Intercom calls (Call Forward: All,
Busy, No Answer, Busy/No Answer, Both Ring,), and incoming
Intercom calls via AspireNet.
1 = Do Not Use
2 = Red
3 = Green (default)
4 = Blue
5 = Yellow
6 = Purple
7 = Sky Blue
8 = White
9 = Rotation
❏ 15-23-01 : MW LED Illumination for Call Coverage/Virtual
Extension Keys
For each call coverage/virtual extension key, select the color to
be used when an incoming call is received (1-9). this applies to
any incoming call - trunk, Intercom, AspireNet. This setting is
based on the extension number which is assigned to the key.
Hold Recall to a Call Coverage/Virtual Extension key will
appear as red.
1 = Do Not Use
2 = Red
3 = Green
4 = Blue
5 = Yellow (default)
6 = Purple
7 = Sky Blue
8 = White
9 = Rotation
To Next Page
Loading...
