UX5000 IP Terminal Features
UX5000 IP Resource Manual 7 - 17
The setting for this option is defined in the Configuration menu within the IP-CTS. To
define the option, perform the following steps at the terminal.
9.2 Terminal Setup
1. Press the MENU button. Access the Maintenance/Configuration menu and
enter the user name and password for the ADMIN mode (by default, User
Name: ADMIN, Password: 6633222).
2. Select [Maintenance Settings], [Application Settings], [XML Settings],
[XML Browser], then [Fixed Mode]. This option must be set to either
"Enable" or "App Priority" for the Popup Mode to work.
3. Click OK.
4. Select [Home URL] and enter the path to the IIS server (example: http://
192.168.1.10/pop_up-sample.xml) and click OK.
5. Press EXIT twice to display the Application Settings menu.
6. Select [Popup].
7. Select [Popup Mode] and choose 1. Disable, 2. Enable, or 3. App Priority.
The App Priority option refers to the definition in the other XML
application buttons/tags displayed. For example, in the above
graphic, the "Wakeup Call" button can be defined to enable or
disable the pop-up menu.
If a set of contents does not have a definition in the tags,
"Disable" is assumed.
By default, this option is set to 3. App Priority.
8. Exit back one window to the [Close Button] option and select 1. Disable or
2. Enable.
If Disable is selected, the pop-up window cannot be closed
manually by clicking the X in the upper right corner of the pop-
up window.
9. Press the EXIT Soft Key as needed to display the initial configuration
screen.
10. Press the SAVE Soft Key to reset the terminal.
To Next Page
Loading...
