ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Firewall Protection 4-15
v1.0, April 2010
To access the DMZ WAN Rules screen:
1. Select Security > Firewall from the menu. The Firewall submenu tabs display.
2. Click the DMZ WAN Rules submenu tab. The DMZ WAN Rules screen displays. (Figure 4-5
shows a rule in the Outbound Services table as an example).
To make changes to an existing outbound or inbound service rule:
In the Action column to the right of the rule, click one of the following table buttons:
• Edit. Allows you to make any changes to the rule definition of an existing rule. Depending on
your selection, either the Edit DMZ WAN Outbound Service screen (identical to Figure 4-6 on
page 4-16) or the Edit DMZ WAN Inbound Service screen (identical to Figure 4-7 on page
4-17) displays, containing the data for the selected rule.
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
To delete or disable one or more rules:
1. Select the check box to the left of the rule that you want to delete or disable, or click the Select
All table button to select all rules.
Figure 4-5
To Next Page
Loading...
