ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
System Logs and Error Messages C-9
v1.0, April 2010
• PPP Authentication Logs
Resolved DNS Names
This section describes the logs of DNS names resolution messages.
VPN Log Messages
This section explains logs that are generated by IPsec VPN and SSL VPN policies. These logs are
generated automatically and do not need to be enabled.
IPsec VPN Logs
This section describes the log messages generated by IPsec VPN policies.
Table C-14. System Logs: WAN Status, PPP Authentication
Message Nov 29 11:29:26 [SRX5308] [pppd] Starting link
Nov 29 11:29:29 [SRX5308] [pppd] Remote message: Login incorrect
Nov 29 11:29:29 [SRX5308] [pppd] PAP authentication failed
Nov 29 11:29:29 [SRX5308] [pppd] Connection
terminated.WAN2(DOWN)_
Explanation Starting link: Starting PPPoE connection process.
Remote message: Login incorrect: Message from PPPoE server for
incorrect login.
PAP authentication failed: PPP authentication failed due to incorrect login.
Connection terminated: PPP connection terminated.
Recommended Action If authentication fails, then check the login/password and enter the correct
one.
Table C-15. System Logs: DNS Names Resolution Messages
Message 2000 Jan 1 05:12:00 [SRX5308] [dnsmasq] [DNSRESOLV]:teamf1.com from
192.168.11.2
Explanation This log is generated when the DNS name (that is, teamf1) is resolved.
Recommended Action None
Note: The same IPsec VPN log messages can appear in the logs that are accessible when
you select the VPN check box on the Firewall Logs & E-mail screen (see
“Activating Notification of Events, Alerts, and Syslogs” on page 9-5) and in the
logs on the IPSec VPN Logs screen (see “Viewing the VPN Logs” on page 9-19).
To Next Page
Loading...
