ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
C-4 System Logs and Error Messages
v1.0, April 2010
Firewall Restart
This section describes logs that are generated when the VPN firewall restarts.
IPsec Restart
This section describes logs that are generated when IPsec restarts.
Unicast, Multicast, and Broadcast Logs
ICMP Redirect Logs
Table C-6. System Logs: Firewall Restart
Message Jan 23 16:20:44 [SRX5308] [wand] [FW] Firewall Restarted
Explanation Log generated when the VPN firewall is restarted.
This message is logged when the VPN firewall restarts after any changes in the
configuration are applied.
Recommended Action None
Table C-7. System Logs: IPsec Restart
Message Jan 23 16:20:44 [SRX5308] [wand] [IPSEC] IPSEC Restarted
Explanation Log generated when the IPsec is restarted.
This message is logged when IPsec restarts after any changes in the configuration
are applied.
Recommended Action None
Table C-8. System Logs: Unicast
Message Nov 24 11:52:55 [SRX5308] [kernel] UCAST IN=SELF OUT=WAN
SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation • This packet (Unicast) is sent to the device from the WAN network.
• For other settings, see Table C-1.
Recommended Action None
Table C-9. System Logs: Unicast, Redirect
Message Feb 2007 22 14:36:07 [SRX5308] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation • This packet is an ICMP Redirect message sent to the router by another router.
• For other settings, see Table C-1.
To Next Page
Loading...
