NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Firewall Protection 4-29
v1.0, April 2010
Setting Session Limits
The session limits feature allows you to specify the total number of sessions that are allowed, per
user, over an IP connection across the VPN firewall. The session limits feature is disabled by
default.
To enable and configure session limits:
1. Select Security > Firewall from the menu. The Firewall submenu tabs display.
2. Click the Session Limit submenu tab. The Session Limit screen displays.
3. Click the Yes radio button under Do you want to enable Session Limit?
4. Enter the settings as explained in Table 4-5.
Figure 4-17
Table 4-5. Session Limit Settings
Setting Description (or Subfield and Description)
Session Limit
User Limit Parameter From the User Limit Parameter drop-down list, select one of the following
options:
• Percentage of Max Sessions. A percentage of the total session connection
capacity of the VPN firewall.
• Number of Sessions. An absolute number of maximum sessions.