NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
1-2 Introduction
v1.0, April 20102
Key Features and Capabilities
The SRX5308 provides the following key features and capabilities:
• Four 10/100/1000 Mbps Gigabit Ethernet WAN ports for load balancing and failover
protection of your Internet connection, providing increased data rate and increased system
reliability.
• Built-in four-port 10/100/1000 Mbps Gigabit Ethernet LAN switch for extremely fast data
transfer between local network resources and support for up to 200,000 internal or external
connections.
• Advanced IPsec VPN and SSL VPN support with support for up to 125 concurrent IPsec VPN
tunnels and up to 50 concurrent SSL VPN tunnels.
• Bundled with a single-user license of the NETGEAR ProSafe VPN Client software
(VPN01L).
• Advanced stateful packet inspection (SPI) firewall with multi-NAT support.
• Quality of service (QoS) and SIP 2.0 support for traffic prioritization, voice, and multimedia.
• Extensive protocol support.
• Easy, Web-based wizard setup for installation and management.
• One console port for local management.
• SNMP-manageable, optimized for the NETGEAR ProSafe Network Management Software
(NMS100).
• Front panel LEDs for easy monitoring of status and activity.
• Flash memory for firmware upgrade.
• Internal universal switching power supply.
• One U rack-mountable, using the rack-mounting kit.