ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Monitoring System Access and Performance 9-23
v1.0, April 2010
Depending on the type of connection, any of the following buttons might be displayed on the
Connection Status screen:
• Renew. Click to renew the DHCP lease.
• Release. Click to disconnect the DHCP connection.
• Disconnect. Click to disconnect the static IP connection.
Viewing the Attached Devices and DHCP Log
The LAN Groups screen shows the network database, which is the Known PCs and Devices table
that contains all IP devices that the VPN firewall has discovered on the local network. The LAN
Setup screen lets you access the DHCP log.
Viewing Attached Devices
To view the network database:
1. Select Network Configuration > LAN Settings from the menu. The LAN Settings submenu
tabs display, with the LAN Setup screen in view (Figure 3-2 on page 3-6).
2. Click the LAN Groups submenu tab. The LAN Groups screen displays. (Figure 9-15 shows
some examples in the Known PCs and Devices table.)
Figure 9-15
To Next Page
Loading...
