NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
9-22 Monitoring System Access and Performance
v1.0, April 2010
2. Click the Status button in the Action column of the WAN interface for which you want to
view the connection status. The Connection Status screen appears in a popup window.
The Connection Status screen displays the information that is described in Table 9-9. The
information that is shown on the Connection Status screen depends on the nature of the
connection—static IP address or dynamically assigned IP address. Therefore, not all
information that is described in Table 9-9 might be shown.
Figure 9-14
Table 9-9. WAN Port Connection Status Information
Item Description (or Subfield and Description)
Connection Time The period that the VPN firewall has been connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Connection Status The connection status can be either Connected or Disconnected.
IP Address
The addresses that were automatically detected (see “Automatically Detecting
and Connecting” on page 2-7) or that you have configured on the WAN ISP
Settings screen (see “Manually Configuring the Internet Connection” on
page 2-11).
Subnet Mask
Gateway
DNS Server
DHCP Server The DHCP server that was automatically detected. This field is displayed only
when your ISP does not require a login and the IP address is acquired
dynamically from your ISP. You have configured these settings on the WAN ISP
Settings screen (see “Manually Configuring the Internet Connection” on
page 2-11)
.
Lease Obtained The time when the DHCP lease was obtained.
Lease Duration The period that the DHCP lease remains in effect.