ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using IPsec Connections 5-17
v1.0, April 2010
In the example that is shown in Figure 5-15, you should receive the message “Successfully
connected to My Connections\UTM_SJ” within 30 seconds.
The VPN client icon in the system tray should say On:
NETGEAR VPN Client Status and Log Information
To view more detailed additional status and troubleshooting information from the NETGEAR
VPN client:
• Right-click the VPN client icon in the system tray and select Connection Monitor. If there is
an active connection, details display on the Connection Monitor screen.
Figure 5-15
Figure 5-16
To Next Page
Loading...
