ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using SSL Connections 6-7
v1.0, April 2010
5. Click Apply to save your settings. The new portal layout is added to the List of Layouts table.
For information about how to display the new portal layout, see “Accessing the SSL Portal
Login Screen” on page 6-23.
Configuring Domains, Groups, and Users
Remote users connecting to the VPN firewall through an SSL VPN portal must be authenticated
before they are being granted access to the network. The login window that is presented to the user
requires three items: a user name, a password, and a domain selection. The domain determines
both the authentication method and the portal layout that are used.
You must create name and password accounts for the SSL VPN users. When you create a user
account, you must specify a group. Groups are used to simplify the application of access policies.
When you create a group, you must specify a domain. Therefore, you should create any domains
first, then groups, and then user accounts.
To configure domains, groups, and users, see “Configuring VPN Authentication Domains, Groups,
and Users” on page 7-1.
ActiveX web cache
cleaner
Select this check box to enable ActiveX cache control to be loaded when
users log in to the SSL VPN portal. The Web cache cleaner prompts the user
to delete all temporary Internet files, cookies, and browser history when the
user logs out or closes the Web browser window. The ActiveX Web cache
control is ignored by Web browsers that do not support ActiveX.
SSL VPN Portal Pages to Display
VPN Tunnel page Select this check box to provide full network connectivity.
Port Forwarding Select this check box to provide access to specific defined network services.
(See “Configuring Applications for Port Forwarding” on page 6-8.)
Note: Any pages that are not selected are not visible from the SSL VPN
portal; however, users can still access the hidden pages unless you create
SSL VPN access policies to prevent access to these pages.
Table 6-1. Add Portal Layout Settings (continued)
Item Description (or Subfield and Description)
To Next Page
Loading...
