ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Firewall Protection 4-17
v1.0, April 2010
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
DMZ WAN Inbound Services Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules are listed. By default, all inbound traffic (from the Internet to the DMZ) is allowed.
Inbound rules that are configured on the LAN WAN Rules screen take precedence over inbound
rules that are configured on the DMZ WAN Rules screen. As a result, if an inbound packet
matches an inbound rule on the LAN WAN Rules screen, it is not matched against the inbound
rules on the DMZ WAN Rules screen.
To create a new inbound DMZ WAN service rule:
1. In the DMZ WAN Rules screen, click the Add table button under the Inbound Services table.
The Add DMZ WAN Inbound Service screen displays. (Figure 4-7 shows an example).
2. Enter the settings as explained in Table 4-3 on page 4-8.
3. Click Apply to save your changes. The new rule is now added to the Inbound Services table.
Figure 4-7
To Next Page
Loading...
