ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
4-20 Firewall Protection
v1.0, April 2010
2. Enter the settings as explained in Table 4-2 on page 4-4.
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
LAN DMZ Inbound Services Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is allowed.
To create a new inbound LAN DMZ service rule:
1. In the LAN DMZ Rules screen, click the Add table button under the Inbound Services table.
The Add LAN DMZ Inbound Service screen displays.
2. Enter the settings as explained in Table 4-3 on page 4-8.
3. Click Apply to save your changes. The new rule is now added to the Inbound Services table.
Figure 4-10
To Next Page
Loading...
