NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using IPsec Connections 5-7
v1.0, April 2010
4. Click Apply to save your settings. The IPsec VPN policy is now added to the List of VPN
Policies table on the VPN Policies screen. By default, the VPN policy is enabled.
5. Configure a VPN policy on the remote gateway that allows connection to the VPN firewall.
6. Activate the IPsec VPN connection:
a. Select VPN > Connection Status from the menu. The VPN Connection Status submenu
tabs display, with the IPSec VPN Connection Status screen in view.
b. Locate the policy in the table, and click the Connect table button. The IPsec VPN
connection should become active.
Figure 5-6
Figure 5-7