NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using IPsec Connections 5-15
v1.0, April 2010
7. Click the disk icon to save the configuration, or select File > Save from the Security Policy
Editor menu.
8. In the left frame, click Security Policy. The screen adjusts.
ID Type From the drop-down list, select Domain Name. Then, below, enter the remote
FQDN that you entered on the VPN firewall’s VPN Wizard screen (see Figure 5-9
on page 5-9). In this example, the domain name is srx_remote1.com.
Secure Interface
Configuration
Leave the default setting, which is the Disabled selection from the Virtual
Adapter drop-down list.
Internet Interface Leave the default setting, which is the Any selection from the Name drop-down
list.
Figure 5-14
Table 5-5. Security Policy Editor: My Identity Settings (continued)
Setting Description (or Subfield and Description)