ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Virtual Private Networking Using IPsec Connections 5-23
v1.0, April 2010
To delete one or more IKE polices:
1. Select the check box to the left of the policy that you want to delete, or click the Select All
table button to select all IKE policies.
2. Click the Delete table button.
To add or edit an IKE policy, see “Manually Adding or Editing an IKE Policy” on this page.
Manually Adding or Editing an IKE Policy
To manually add an IKE policy:
1. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs display, with the IKE
Policies screen in view (see Figure 5-20 on page 5-22).
2. Under the List of IKE Policies table, click the Add table button. The Add IKE Policy screen
displays (see Figure 5-21 on page 5-24).
Note: You cannot delete or edit an IKE policy for which the VPN policy is active. You
first must disable or delete the VPN policy before you can delete or edit the IKE
policy.
Note: To gain a more complete understanding of the encryption, authentication and
DH algorithm technologies, click the link to “Virtual Private Networking Basics”
in Appendix E.
To Next Page
Loading...
